SYNTHETIC RED OXIDE PRIMER

This red oxide primer is based on corrosion inhibiting pigments and synthetic resin. It can be easily applied by brush or spray and dries hard to form a good adherent corrosion resistant coating. It is use in shutter, windows & fabrication work.

TECHNICAL INFORMATION

Areas of Application : Metal Surfaces.

Finish : Smooth & Matt finish

Thinner recommended : Synthetic Thiner or Mineral Terpentine

Supply of Viscosity : 180+10 sec on FC B4 at 30° C

Drying Time : Surface Dry ~ 45-60 minutes

Drying Time : Touch Dry ~ Less Then 8 Hours.

Drying Time : Hard Dry ~ Overnight

Application Viscosity : 70-80 sec for brush application25-30 sec for spraying

Recoatability : Good

Intercoat Adhesion : Good

Spreading Capacity : 10+2 sq. mtrs./ Ltrs./ Coat

Flash Point : Above 38º C

Packing Available : 20 Ltrs.,10 Ltrs, 4 Ltrs.,2 Ltrs, 1 Ltrs., 500 ml.,200ml.

Flash Point : Above 38° C

Copyright © gayatripaints.com. All Rights Reserved.