SYNTHETIC GLOSSY RED OXIDE PRIMER
This Glossy Red Oxide Primer is based on corrosion inhibiting pigments and synthetic resin. It can be easily applied by brush or spray and dries hard to form a good adherent corrosion resistant coating.It is use in shutter,windows & fabrication work.
TECHNICAL INFORMATION
Areas of Application : Metal Surfaces.
Supply of Viscosity : 180+10 secs on FC B4 at 30º C
Thinner recommended : Syn. Thiner or Mineral Terpentine
Application Viscosity : 70-80 sec for brush application 25-30 sec For Spraying
Drying Time : Surface Dry ~ 45-60 Minutes.
Drying Time : Touch Dry ~ Less Then 8 hours
Drying Time : Hard Dry ~ Over Night
Recoatability : Good
Intercoat Adhesion : Good
Spreading Capacity : 10+2 sq. mtrs./ Ltrs./ Coat
Flash Point : Above 38º C
Packing Available : 20 Ltrs.,10 Ltrs, 4 Ltrs.,2 Ltrs, 1 Ltrs., 500 ml.,200ml.